The 1950 GMC base engine for the half-ton pickup was the 228-cubic-inch in-line six-cylinder. In contrast, the base Chevrolet model featured the smaller 216.5-cubic-inch straight-six. The 93-horsepower 228 had a 3.6-inch cylinder bore and a 3.8-inch stroke. The 228’s compression ratio was 8-to-1.
The optional 110-horsepower 248 straight-six had a 3.7-inch bore and 3.8-inch stroke and 7.5-1 compression. The biggest powerplant available on the GMC truck was the 115-horsepower 270 six-cylinder with a 3.7-inch bore and 4-inch stroke. The 270’s compression ratio was 7.5-to-1. Canadian versions of the 1950 GMC truck were equipped with Chevrolet’s 216 straight-six with 228 and 248 available as options. Another significant difference between the GMC and Chevy models was that the GMC used a six-volt positive ground electrical system, while Chevrolet was equipped with a six-volt negative ground system. Like its Chevy sibling, the GMC pickup included the half-ton, three-quarter ton and 1-ton models.
1948 Chevrolet Pickup Parts
The Chevys featured wheelbase of 116, 125.25 and 137 inches, while the GMC wheelbases were two inches longer for each of the three models to accommodate the larger engines. Body dimensions, however, were identical with the cargo boxes measuring 50 inches wide and 78, 87 or 108 inches long. The 1.5-ton and larger GMC stake bed and flatbed trucks rode on either a 137-inch wheelbase with a 105.5-inch bed and 9-foot total length or a 161-inch wheelbase with 148-inch bed and a 12-foot total length. All GMC trucks featured all-wheel drum brakes, a forged steel I-beam front axle and hypoid single reduction full floating rear axle. The rear suspension featured steel leaf springs with the front and rear both equipped with tubular shock absorbers. A three- or four-speed manual transmission matched the engines. The four-speed was optional on the half-ton and three-quarter ton models and standard on the 1-ton and larger versions.
For 1950, General Motors engineers abandoned the process of bolting together the cab and welded the cab to minimize road noise and vibrations caused by the stiff frame. The cab also rode on the frame cushioned with a three-point suspension system for a smooth ride. The gross vehicle weight rating ranged from the half-ton’s 4,100 lbs.
Fallout 4 automatron free download. Jul 5, 2018 - Fallout 4 Automatron DLC Free Download PC Game setup in single direct link for windows. Fallout 4 Automatron is an impressive RPG game. Feb 7, 2017 - Before you start Fallout 4 Automatron DLC Free Download make sure your PC meets minimum system requirements. Operating System: Tested on Windows 7 64 Bit. CPU: Intel Core i5 or later. Hard Disk Space: 30 GB. Note: Base Game Is Required Click Here to Download.
To the 3-ton’s 26,000-lb.
1954 Chevy Pickup For Sale
![Pickup Pickup](/uploads/1/2/3/9/123920174/660873078.jpg)
1948 Chevrolet Other PickupsPLEASE READ FULL DESCRIPTION AND CALL WITH ANY QUESTIONS BEFORE THE END OF AUCTION.Up for auction is a Pro street 1948-1954 chevy truck Custom Chassis and Drive train with (short bed,running boards,only) DRIVE TRAIN: Rebuilt chevy 350/400 trans with a narrowed ford 9 inch rear Diff. 4 link rear with coil overs. This chassis and drivetrain is complete with front disc brakes rear drum brakes,master cylinder, fuel cell with pump, headers with exhaust pipes, aluminum radiator,fan,trans cooler, carburator,intake,alternator, This Chassis and drive train (short bed ) was what the completed truck(last 4 pictures) was sitting on but was updated with a fatman chassis and a LSX fuel injected motor and is not for sale. ( AGAIN THIS AUCTION IS FOR THE CUSTOM CHASSIS AND DRIVE TRAIN WITH SHORT BED ONLY) AGAIN THE LAST 4 PICTURES ARE OF A COMPLETED TRUCK THAT IS NOT FOR SALE. IT IS JUST AN EXAMPLE OF WHAT IT LOOKS LIKE WHEN COMPLETED.
1948 To 1954 Chevy Trucks For Sale
Please call 727-773-6774 tony with any questions before the end of auction ( the 2 front wheels dont go with this auction i will replace them with 2 roller ).
Chevrolet got the jump on Ford, Dodge and Studebaker by producing itsAdvanced Design series of pickup trucks in 1947, a radical stylingchange from the prewar model trucks. These new trucks offered more cabroom, a streamlined body style and the capacity to carry heavierloads. Chevy produced the 1954 pickup through 1955 and was the last ofthe Advanced Design trucks. It came as the half-ton 3100, 3/4-ton 3600and 1-ton 3800. PowerChevrolet replaced its 216.5-inch in-linesix-cylinder engine in 1954 with the 235.5-cubic-inch straight six.The new engine featured a 3 9/16th-inch cylinder bore and a 315/16th-inch stroke with a 7.5:1 compression ratio. The enginereceived its fuel through. General Motors produced a wide range of Chevrolet trucks in 1937.While they previously only manufactured a commercial 1/2-ton truck anda 1 1/2-ton heavy truck, the production of which continued on, theyintroduced a medium-sized 1-ton model and a light 3/4-ton model intotheir lineup.
The 1/2-ton pickup was a primary vehicle in their 1937model year. EngineThe 1937 Chevrolet 1/2-ton pickup truck had a6-cylinder, inline engine with a detachable cast-iron cylinder head.It had a displacement of 216.5 cubic inches, a compression ratio of6.25:1 and a bore and stroke of 3.5 by 3.75 inches. It had 170foot-pounds of torque and a horsepower of 76, as listed in the ChevyOld Car Manual Proje. Chevrolet was founded in 1911 by Louis Chevrolet, William Little andEdwin Cambell, and was purchased by General Motors in 1918. The firstEuropean assembly plant went live for Chevrolet in 1923, inCopenhagen, Denmark, and the first non-U.S or Canadian manufacturedvehicle rolled off the assembly line on January 7, 1924.ColoradoThe 2011 Chevrolet Colorado comes in 16 different trim levels.Three engines are available for these trims. The 2.9-liter enginegenerates 185 horsepower and 190 foot-pounds of torque. It has afour-speed automatic overdrive transmission, as well as a five-speedmanual overdrive transmission available for all trim levels.
Thefour-wheel-drive variations, using th. The Chevy 454 SS pickup truck was produced between 1990 and 1993. Thispickup truck is a full-size, high-performance vehicle fitted with apowerful engine. All Chevy SS 454 pickups rolled off the assemblylines in Fort Wayne, Indiana. EngineThe 1990 Chevy 454 SS featureda 454-cubic-inch engine. This powerful eight-cylinder engine wascapable of producing 230 horsepower and 385 foot-pounds of torque.
The1993 Chevy 454 SS pickup delivered 255 horsepower and 405 foot-poundsof torque.PerformanceThe 1993 Chevy 454 SS could cover aquarter-mile in around 15.7 seconds, reaching speeds of 60 miles perhour in around 7.1 seconds. While the Chevy 454 SS line offered highpower output, they w. GM's Chevrolet pickups were manufactured as early as the 1930 andsince then there has been continuous development of these vehicles.The manufacturer introduced an upper trim level for the Chevrolet C/Kknown as the Silverado for its pickup trucks. This Silverado was thetruck for the year 1987 on the Chevy production line. This truck cameto succeed the 1986 Chevy pickup truck although there were very minoralterations or modifications to the 1987 Silverado truck. Most of thespecifications were maintained as from the previous models. Thedifferences are mainly in the equipment and engine specifications.EngineThe Chevy Silverado has got a 4.3-litre V-8 engine that iscapable of produci.
World War II forced American auto manufacturers to limit production ofvehicles. 1946 marked a return to pre-war assembly numbers. Chevroletbuilt over 300,000 trucks in 1946, compared to 36,000 in 1945. Pickupsizes included 1/2-ton, 3/4-ton, 1-ton and 1 1/4-ton, and designs werebased on the 1941 models, the final year of full production before thewar. WheelbaseWheelbase size increased by 10.25 inches per weightclass.
For example: a 1/2-ton truck's wheelbase measured 115 inches, a3/4-ton's was 125.25 inches and a 1-ton's was 134.5 inches.WideSelectionChevrolet produced several different models per size. Eightdifferent models of 1/2-ton pickups were available. The 1-ton pickup c. In 1991 Chevrolet produced four main pickup styles: the smaller S-10,the regular-duty C/K 1500 and two heavy-duty models, the C/K 2500 and3500. No major changes were present for this year as Chevy stuck withwhat was working for it. Primarily used as farm or ranch vehicles orwork trucks, you can still see these models on the road today, stillat work. 1991 Chevy S-10 PickupThis smaller pickup featured twoengine options, the 2.5-liter, 105-hp I-4 or the 4.3-liter, 160-hp V-6engine.
The first produced 105 hp with 135 lb-ft of torque and thesecond was capable of reaching 160 hp with 235 lb-ft of torque. Itcame in either a regular cab or extended cab and buyers could selectbetween the. The 1954 Chevrolet pickup was the second to the last year ofChevrolet's Advanced Design era of 1947 through 1955 in which thetruck maker abandoned prewar styling by integrating headlamps into thefront fenders, flattening the hood, and providing a roomier and safercab. The '54 also represented the biggest changes in this generationof trucks, with several technological and body styling changes.OriginsThe 1954 model, this with a rare chrome grille, was roomierthan previous generations.The 1954 models perhaps best represent thesum of all Advanced Design trucks of 1948 through 1955.
From World WarI through the mid-1920s, pickups were simply barebones workhorses soldwith chassis and c.
![Pickup Pickup](/uploads/1/2/3/9/123920174/616830011.jpg)
![1948-1954 Chevrolet Pickup Vehicle Specifications 1948-1954 Chevrolet Pickup Vehicle Specifications](/uploads/1/2/3/9/123920174/126358648.jpg)
The 1977 Chevy C-10 pickup truck was available with a choice of engines. The 4.1-liter 250-cubic-inch inline-six engine came standard in the C-10, and offered 100 horsepower at 3,600 rpm with 175 foot-pounds of torque at 2,000 rpm. An optional inline-six was 292 cubic inches and 4.8 liters with 120 horsepower at 3,600 rpm with 225 foot-pounds of torque at 2,000 rpm. The high-output 454 cubic inch 7.4-liter engine had 230 horsepower at 4,000 rpm with 355 foot-pounds of torque at 2,800 rpm. The medium output 350-cubic-inch engine had 155 horsepower at 3,600 rpm with 225 foot-pounds at 2,400 rpm. Finally, Chevy offered the 307 cubic inch with 115 horsepower at 3,600 rpm with 205 foot-pounds of torque at 2,000 rpm. In 1977, Chevy offered automatic door locks and powered windows for the first time.
Chevy offered four different options packages, custom deluxe, Scottsdale, Cheyenne and Silverado. The Cheyenne package had bench seats and full-depth padded seats with backrests. The seats had an all-vinyl seat cover or vinyl and nylon cloth seat cover. Other features included custom steering wheel and an ashtray mounted cigar lighter. Options included power steering, power brakes, electric clock, heavy duty shocks and rally wheels.
Chevrolet has produced full sized pickup trucks under many nameplates and platforms. Almost all Chevrolet branded vehicles were also available under the brand as well:. 1947-March 1955. April 1955-59: There were actually two Chevy pickups in 1955.
The First Series was a carryover, the new models were the Second Series. (1960–1998 in US, 99 in Canada). (1999-current). (2001-2013)Chevrolet has also sold or produced many compact/mid-size pickup trucks:.
2003-2007. 1972-81, made by Isuzu. 1982-2004. 2004-12, 2015-currentChevrolet has also produced pickup trucks based on passenger cars:.
1959-60, 1964–87Chevrolet has also sold pickup trucks which are variants like the while the is considered as the longest running vehicle nameplate which is also a Chevy Truck.References.